Our tracker got the scrape function switched off for increased privacy. A torrent client has to join the swarm as "active" peer to get information on the peers. If the torrent is just queued, a scrape error will be shown. So if your torrents are just queued, it is "normal" and you might change the priority settings or force start to get them running.

If your torrents are in "Seeding" or "Downloading" status (means not queued downloading or seeding), the cause is another and we have to look for other solutions than starting them.

You might want to try different settings for "Protocol" encryption …

Another possibility is that your connections are all already in use by other downloading and seeding torrents. You could run the "Bandwidth" test and select a proposed setting according to it's result.

Just in case this helps anyone, the setup here at this site may be very different. But at another site,we have found that sometimes when you add a torrent to utorrent 3.3, utorrent strips most of the torrent announce, including the passkey, as it loads into the client. The proper announce with passkey is present in the downloaded .torrent file, utorrent corrupts it as you add it.

The only way to get round this is either to downgrade to a lower version of utorrent, or edit the passkey and announce in each torrent. Adding the right passkey and announce will enable the torrent to start where this is the problem.

utorrent 3.3 is not much good, in my opinion…

Thank you for the suggestions and for the link to the Azureus Preferences/Options.  I've made the recommended changes to 1:1 ratio and unchecking the boxes referring to 0 peers.  In the past I have restarted Azureus/Vuze once a day, but often it seems to run well on its own.  Now I need to be patient and increase my share ratio. 🙂  Thanks again!

You could look at that newer draft upload guide > https://forum.gaytorrent.ru/index.php?topic=18666.0

You appear for the site as the seeder, so it looks that you've done everything right, means got back the small .torrent file with the "Download" button from the description page and make find your BitComet the movie file when loading the .torrent file into BitComet.

Now what is "strange" is that the site doesn't register any upload by you, respectively download of the leeching peers.

That let assume that there is a connection issue of your Modem/Router (port forwarding / NAT), Firewall(s) in both computer and Modem/Router or the BitComet set-up.

Some possible solutions:

STOP and a little later START the torrent in BitComet Enable UPnP in both BitComet and the Modem/Router Enable a firewall exception for BitComet and the port it uses for incoming TCP connections

Restart BitComet after each change., except the first item listed above.

This assumes that you are able to download a torrents files, but can't upload your own torrent's files. If you can't download either, let us know.

If your file is in a different size or format, you can upload it. But if it has the same size and format, don't upload it just yet.
Sometimes dead torrents get resurrected, and if this happens, your torrent will be considered a duplicate and will be removed from the system.
The best you can do is contact the Helpdesk and inform them that you have a replacement for a dead torrent. You have to provide the link for the dead torrent.
A Reseed Request will be sent, and if no seeder appears within 3 days, the dead torrent will be removed from the system and you can upload yours.

If you have left the downloaded data in the same place (directory and/or drive) and use µTorrent, you could copy the content of %AppData%/utorrent from your old installation to the new.

The other way is the reseed procedure:

For µTorrent/BitTorrent look there > https://forum.gaytorrent.ru/index.php?topic=6539.0

or generally:
https://www.gaytorrent.ru/faq.php?lan=1#505

That seemed to work..

There was japanese text in the original file names… so i have removed it and can now download the file succssfully

Thanks again Uwe... you are great!

When there's no seeder, torrent goes inactive.
So you need to set searching option 'including dead' on the browse page.
Or just go to your torrent page.  🙂 > https://www.gaytorrent.ru/mytorrents.php

Flat 0.5 points per hour you are seeding at least one torrent.

The more torrents you've "seeding" the higher the chance to have real upload on one of them. That is better than any bonus points.

To answer your question:
It depends on your all time highest average upload rate. Each 20 KBytes/s it is incremented by 1.

Further explanations on that number:
It is to be considered when you upload your own new torrent only. It is no longer a rule, it is rather a recommendation. The limit to only one new at a time has been relieved as well. Here the new rule:

"5. Upload only ONE NEW TORRENT AT A TIME in order to initially seed your upload as fast as possible. If multiple torrents are uploaded, they MUST be completed within 24 hours."

This means if you ensure all new torrents to be completely uploaded in 24 hours, you can upload multiple at the same time. A single new torrent can take longer. This is to allow uploader with smaller upload rates to upload (bigger torrents), too.

When no own new torrent is uploaded, there is no limit in the number of uploading torrents.

The number of downloading torrents depends at any time on your upload, share ratio and user status as indicated in the "Downloading Rules".
Low ratio warned users are limited to one download at a time.

Users with download rights suspended can still download a Freeleech torrent.

Apologies for the delayed response, Junior, and a big thank you for agreeing to edit my torrent for me. I've sent you a PM. 🙂

worked for me too! thanks!  :masbana:

You jumped on the windows 8 wagon a bit too soon, they are yet revamping the whole OS to clean errors glitchs and overall compatibility, so if you can surf to the compatibility mode and chose windows 7 you might be lucky, probably windows 8 will be (cleaner and airier) in a year or so, personally I'll stay with 7 'till 9 release and see the reviews like a hawk.

Here is a guide on reseeding (reloading torrents); https://forum.gaytorrent.ru/index.php?topic=6539.0

If you have still have the .torrent files, simply open them and continue from step 4.

We have promoted the torrent to the top of the list and it got many new leecher.

Nevertheless, you should make that test, to see if you haven't configuration issures on your PC, making seeding more difficult than needed.

You should do good upload in about 30 minitues from now. If not, check your µTorrent's connectivity:

µTorrent > Options > Setup Guide … > select the "Network" box and run the test. The result should be green, not orange.

that won't work, I mean BB code.

you can provide a disabled link to the trailer, e.g. by typing hXXp:// i/o http://

NB.: Our rules regarding links in descriptions might change in the near future. Visit the rules regularly.

Old builds of µTorrent can be download there:

hXXp://http://www.filehippo.com/download_utorrent/

it goes back quite far if one clicks "view more .. " on the bottom of the built list.

For example the latest built of the 2 series 2.2.1, which is recommended for uploader using our QTM upload utility:

hXXp://www.filehippo.com/download_utorrent/9859/

BTW: We got a torrent for that µTorrent version there > https://www.gaytorrent.ru/details.php?id=135394